Trex® RainEscape®
Trex® RainEscape® Downspouts
Where the trough meets the gutter. A molded piece that collects water from the trough and hands it off to your gutter. Fits joists 12" or 16" on center.
- Material
- Low-density polyethylene (LDPE), form molded
- Thickness
- 40 mil (1.016 mm), nominal
- Size (W x L x H)
- 17-11/16" x 13-5/8" x 10-3/4"
- Fits
- Joists 12" or 16" on center
Overview
The Trex® RainEscape® downspout collects the water from the trough and sends it out of the system and into your gutter. Each one is a molded piece made to fit between joists spaced 12″ or 16″ on center, so it works with standard deck framing. Cut it along the score marks to fit your layout.
Good to know
- Downspouts are sealed to the trough and taped to the deck joists with Trex® RainEscape® 4″ tape. See the installation guide for the full sequence.
- Not sure how many you need? Use the Materials Estimator or ask an installer.
Key features
- Molded from low-density polyethylene, 40 mil thick, for a tough, flexible fit
- Fits joist spacing of 12" or 16" on center
- Score marks make it easy to cut to the width you need
- Extends about 1" into the gutter to hand the water off
- Black or brown to match the trough
Sizes and colors
- Fits
- Joists 12" or 16" on center
- Colors
- Black, Brown
Trex® RainEscape® products are made and sold by IBP, LLC under a trademark license from Trex Company, Inc.
Specs
| Material | Low-density polyethylene (LDPE), form molded |
|---|---|
| Thickness | 40 mil (1.016 mm), nominal |
| Size (W x L x H) | 17-11/16" x 13-5/8" x 10-3/4" |
| Fits | Joists 12" or 16" on center |
| Colors | Black, Brown |
| Packaging | Do not stack more than 3 boxes high |
| Brand | Trex® RainEscape® |
| Manufacturer | IBP, LLC |
Reviews
No reviews yet.
Write a review
Questions & answers
Frequently asked questions
- What joist spacing does the downspout fit?
It fits joists 12" or 16" on center.
- Where does the water go after the downspout?
The downspout hands the water off into your gutter. It should extend about 1" into the gutter. Cut or extend it as needed.
- Can I cut the downspout?
Yes. It has score marks so you can cut it along a 12" or 16" side to match your joist spacing.

